usbh_hw_pins_config

#include <RTL.h>
#include <rl_usb.h>

BOOL usbh_hw_pins_config (
  BOOL on
);

The usbh_hw_pins_config function is used for configuration or unconfiguration of pins for the custom USB Host controller. The argument on specify if function should configure or unconfigure pins.

The usbh_hw_pins_config function is part of the RL-USB Host software stack.

You can modify this function to suit different custom controller hardware. This function will need to be changed if custom controller is used on a chip that does not yet have a low level driver provided.

The usbh_hw_pins_config function returns one of the following manifest constants.

• __TRUE
  Success.
• __FALSE
  Indicates that the configuration/unconfiguration of pins has failed.

usbh_hw_delay_ms, usbh_hw_ep_add, usbh_hw_ep_config, usbh_hw_ep_remove, usbh_hw_get_capabilities, usbh_hw_get_connect, usbh_hw_get_speed, usbh_hw_init, usbh_hw_port_power, usbh_hw_port_reset, usbh_hw_urb_cancel, usbh_hw_urb_submit