Getting Started

To run this RL-CAN STM32F103 example on a board, ensure you have:

• a MCBSTM32 Evaluation board from Keil
• a ULINK2® USB Interface Adapter from Keil
• a USB cable for 5 V power supply.

1. Copy the example from \Keil\ARM\Boards\Keil\MCBSTM32\RL\CAN\CAN_Ex1 to any directory you want to use.
2. Load the project CAN_Ex1.uv2 file from the copied directory into µVision® 3 IDE (Project —> Open Project...)
   
   
   
   
3. Select the target MCBSTM32.
   
   
4. Rebuild the executable file from source files. Click on Project —> Rebuild all target files on the menu or click on the toolbar button .
   
   
5. Connect the ULINK device to the PC's USB port and to the JTAG Connector on the MCBSTM32 board.
   
   
6. Power-up the MCBSTM32 board by connecting the board's USB power input to the PC's USB port.
7. Click on Flash —> Download on the menu to download the executable file to the STM32 flash target on the MCBSTM32 board.
   
   
8. Rotate the potentiometer and watch the Tx and RX values on the LCD, and the state of the LEDs change according to the position of the potentiometer.