Technical Support
Support Resources
Product Information
|
What's New in MDKARM Version 4.54
-
[µVision]
-
This MDK-ARM release is delivered with µVision
V4.54 IDE.
-
Added: CMSIS-DAP Debugger driver for debugging Cortex-M
processor-based devices. Refer to CMSIS-DAP
Debugger User's Guide.
-
Added: Configuration options for debugging multi-core
Cortex-M devices with ULINKpro or ULINK2. Refer to
the ULINK user's guides, for example,
SW Device.
-
[New Supported Devices]
-
Atmel
SAM3A2C, SAM3A4C, SAM3A8C,
SAM3S8B, SAM3S8C, SAM3SD8B, SAM3SD8C,
SAM3X8H,
SAM4S16A, SAM4S16B, SAM4S8A, SAM4S8B, and
SAM4S8C
-
Freescale
Semiconductor
MK53DX256xxx10,
MKL04Z16xxx4,
MKL04Z32xxx4,
MKL04Z8xxx4,
MKL05Z16xxx4,
MKL05Z32xxx4,
MKL05Z8xxx4,
MKL14Z32xxx4,
MKL14Z64xxx4,
MKL15Z128xxx4,
MKL15Z32xxx4,
MKL15Z64xxx4,
MKL24Z128xxx4,
MKL24Z32xxx4,
MKL24Z64xxx4,
MKL25Z128xxx4,
MKL25Z32xxx4, and
MKL25Z64xxx4
-
NXP
Semiconductors
LPC1114/102,
LPC11U23/301,
LPC11U24/301,
LPC11U24/401,
LPC11U34/311,
LPC11U34/421,
LPC11U35/401,
LPC11U35/501,
LPC11U36/401,
LPC11U37/401,
LPC11U37/501,
LPC1833, LPC1837, LPC1853, LPC1857,
LPC4072, LPC4074, LPC4076, LPC4078, LPC4088,
LPC4353, and
LPC4357
-
STMicroelectronics
STM32L151QC,
STM32L151QD,
STM32L151RC,
STM32L151RD,
STM32L151VC,
STM32L151VD,
STM32L151ZC,
STM32L151ZD,
STM32L152QC,
STM32L152QD,
STM32L152RC,
STM32L152RD,
STM32L152VC,
STM32L152ZC,
STM32L162QD,
STM32W108C8,
STM32W108CB,
STM32W108CC,
STM32W108CZ, and
STM32W108HB
-
[Board Support]
-
Corrected: Clock settings for Atmel AT91SAM9G45-EK
evaluation board, based on Atmel
AT91SAM9G45 device, in
..\ARM\Boards\Atmel\AT91SAM9G45-EK\ folder.
-
[Middleware]
-
-
-
Added: SD Card driver for Infineon
XMC4500 devices. SDMMC_XMC4500 driver can be
found in folder ..\ARM\RL\FlashFS\Drivers
-
Added: SD_File example for Infineon
Hexagon Application Kit in folder
..\ARM\Boards\Infineon\Hexagon Application
Kit\CPU_45A-V2\RL\FlashFS
-
-
Added: a Firewall Support operation mode in TFTP
Server.
-
Added: support for event driven TCPnet
operation in RTX environment.
-
Added: support for virtual IP, where
multiple ethernet links from the server share a single
IP address. This network configuration is used in
adaptive load balancing.
-
Enhanced: an empty username in Net_Config.c now
disables the system admin account in multiuser
authentication for HTTP, FTP and
Telnet server.
-
Extended: an ioctlsocket() function in
BSD socket interface. The command
FIO_FLOW_CTRL was added.
-
Corrected: checksum error in processing
IGMPv2 packets with IP Router Alert option.
-
Corrected: potential failure in processing of
IGMP Queries.
-
Corrected: failure in processing large 1500 byte
PPP packets.
-
-
Added: CAN_Ex1 and Can_Ex2 example
for Infineon CPU_45A-V2 evaluation board.
Examples can be found in
..\ARM\Boards\Infineon\Hexagon Application
Kit\CPU_45A-V2\RL\CAN\ folder.
-
Added: CAN_Ex1 and Can_Ex2 example
for Freescale TWR-K60N512 evaluation board.
Examples can be found in
..\ARM\Boards\Freescale\TWR-K60N512\RL\CAN
folder.
-
Corrected: Enabled automatic retransmission in
drivers for ST devices.
-
-
Added: USB Host examples for Atmel
AT91SAM9G45-EK evaluation board. The examples can
be found in
..\ARM\Boards\Atmel\AT91SAM9G45-EK\RL\USB\Host
folder.
-
Added: USB Host examples for Freescale
TWR-K20D50M evaluation board. The examples can be
found in
..\ARM\Boards\Freescale\TWR-K20D50M\RL\USB\Host
folder.
-
Added: USB Host examples for Freescale
TWR-K20D72M evaluation board. The examples can be
found in
..\ARM\Boards\Freescale\TWR-K20D72M\RL\USB\Host
folder.
-
Added: USB Host examples for Freescale
TWR-K40X256 evaluation board. The examples can be
found in
..\ARM\Boards\Freescale\TWR-K40X256\RL\USB\Host
folder.
-
Added: USB Host examples for Freescale
TWR-K53N512 evaluation board. The examples can be
found in
..\ARM\Boards\Freescale\TWR-K53N512\RL\USB\Host
folder.
-
Updated: USB Host examples for Freescale
TWR-K60N512 evaluation board. The examples can be
found in
..\ARM\Boards\Freescale\TWR-K60N512\RL\USB\Host
folder.
-
Corrected: USB Host examples did not work on newer
revision of Freescale TWR-K70F1M/120M
board.
-
Corrected: USB Device report count larger then 255
was not possible in HID Report Descriptor.
-
Corrected: USB Host examples and driver for Keil
MCB2400 evaluation board, updated with corrected
connect/disconnect handling.
-
-
Updated: Segger emWin graphic library version
5.16 in folder ..\ARM\Segger\emWin\.
|