Keil Logo Arm Logo

Device Database®

STMicroelectronics STM32L151VD

The STMicroelectronics STM32L151VD is an Operating conditions - Operating power supply range: 1.65 to 3.6 V (without BOR) 1.80 to 3.6 V (with BOR) - Temperature range: -40 to 85 °C Low power features - 4 modes: Sleep, Low-power run, Low-power sleep, Stop with RTC, Stop, Standby - Dynamic core voltage scaling down to 233 uA/MHz - Ultralow leakage per I/O: 50 nA - Fast wakeup from Stop: 8 us - Three wakeup pins Core: ARM 32-bit Cortex-M3 CPU - 32 MHz maximum frequency, 33.3 DMIPS peak - Memory protection unit Reset and supply management - Low power, ultrasafe BOR with 5 selectable thresholds - Ultralow power POR/PDR - Programmable voltage detector (PVD) Clock management - 1 to 24 MHz crystal oscillator - 32 kHz oscillator for RTC with calibration - Internal 16 MHz factory-trimmed RC - Internal 37 kHz low consumption RC - Internal multispeed low power RC, 64 kHz to 4 MHz - PLL for CPU clock and USB (48 MHz) Low power calendar RTC - Alarm, periodic wakeup from Stop/Standby Memories - 384 Kbyte Flash memory with ECC - 4 Kbyte of data EEPROM with ECC - 48 Kbytes of RAM Up to 115 fast I/Os all mappable on 16 external interrupt vectors Development support - Serial wire debug, JTAG and trace DMA: 7-channel DMA controller LCD 8 × 40 or 4 × 44 with step-up converter 12-bit ADC up to 1 Msps/24 channels - Temperature sensor and internal voltage reference - Operates down to 1.8 V 2 × 12-bit DACs with output buffers 2 ultralow power comparators - Window mode and wakeup capability 10 timers: - 6 × 16-bit general-purpose timers - 2 × 16-bit basic timers - 2 × watchdog timers (independent and window) Up to 8 communication interfaces - Up to 2 × I2C interfaces (SMBus/PMBus) - Up to 3 × USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) - Up to 2 × SPIs (16 Mbit/s) - USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID.

[Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Data Sheets
Datasheet
1,348,329 bytes
Generic User Guide
1,364,135 bytes
Technical Reference Manual
2,247,922 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available at this time.

arm-logo-small

Keil logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.