Configuration Options

Configuration options are set in the file File_Config.c. RL-FlashFS supports multiple volumes.

The options allow configuring:

Option Block	Descriptions and Options
File System	Specify Number of open files Specify CPU Clock Frequency [Hz]
Flash Drive	Enable the Flash Drive Specify Base Address of the Flash Device Specify Device Size Specify Content of Erased Memory Specify Device Description file Enable Default Drive [F:]
SPI Flash Drive	Enable the SPI Flash Drive Specify Device Size Specify Content of Erased Memory Specify Device Description file Enable Default Drive [S:]
RAM Drive	Enable Ram Drive Specify Device Size Specify Number of Sectors Enable RAM Buffer Relocation Specify Base address of the RAM Buffer Enable Default Drive [R:]
Memory Card Drive 0	Enable Memory Card Drive 0 Specify Bus Mode Specify File System Cache size Enable Cache Buffer Relocation Specify Base address of the Cache Buffer Enable Default Drive [M0:]
Memory Card Drive 1	Enable Memory Card Drive 1 Specify Bus Mode Specify File System Cache size Enable Cache Buffer Relocation Specify Base address of the Cache Buffer Enable Default Drive [M1:]
USB Flash Drive 0	Enable USB Flash Drive 0 Specify File System Cache size Enable Default Drive [U0:]
USB Flash Drive 1	Enable USB Flash Drive 1 Specify File System Cache size Enable Default Drive [U1:]
NAND Flash Drive	Enable NAND Flash Drive Specify Page size Specify Block Size Specify Device Size [blocks] Specify Page Caching Specify Block Indexing Enable Software ECC (error correction code) Specify File System Cache size Enable Cache Buffer Relocation Specify Base address of the Cache Buffer Enable Default Drive [N:]