Keil Logo

Program Execution

Program execution can be controlled in several ways:

Symbol Description
Reset Button Resets the CPU and removes all breakpoints.
Run Button Starts executing the program.
Serial Window 1 Button Open the Serial Window #x and enter the 'd' command for the MEASURE application. MEASURE shows the values from I/O Port2 and A/D input 0 – 3. The Serial Window shows the following output:
Step Over Button You can single-step through the program using the Step buttons in the Debug toolbar. The current instruction is marked with an yellow arrow in the code. The arrow moves each time you step.
Run/Stop Button Halt program execution with the Stop button or from the menu Debug - Start/Stop Debug Session. You may also press ESC in the Command Line of the Command Window.

Use Debug Commands from within the window Command.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.