Press Release

04 Jun 2003

DMH Announces SNMP Agent for Dallas DS80C400

Acton, MA: DMH Software announces the availability of its portable SNMP Agent (snmpv1, snmpv2c, snmpv3) and SMIv2 Management Information Base (MIB) Compiler for the Dallas Semiconductor DS80C400 TINI^® platform. The highly portable Advanced SNMP Agent code can now be compiled by 8-bit compilers (like the Keil C51 Compiler) and may be integrated and used in small, 8-bit systems.

The Dallas Semiconductor TINI^® platform consists of both hardware and software for networking Dallas microcontrollers. The platform consists of software APIs for broad-based I/O, a small O/S, and a full TCP IPv4/6 network stack. TINI currently supports both the DS80C390 and DS80C400 microcontrollers with support planned for future microcontrollers.

DMH's highly portable Advanced SNMP Agent is integrated with the Dallas DS80C400 TINI platform C Library software. The snmp-agent for the TINI platform is available in source code form or as a binary SDK. Engineering changes required to meet the 8051 CPU architecture have not compromised features or protocol completeness. A set of compile-time flags allow you to reduce the code and data size to meet memory restrictions. The SNMP Agent code was built and tested using the popular Keil C51 C Compiler for the 8051.

The Advanced SNMP Agent is highly portable and may be compiled by 8-bit compilers (e.g. 8051). It can be integrated and used in other small systems based on 8-bit, 16-bit, 32-bit, or 64-bit CPUs. You can even compile the same SNMP Agent code for w32 or Linux platforms. This allows you to develop the support for your MIBS in a convenient development platform. Once your snmp-agent is tested you can compile it for your 8-bit target.

The DMH SNMP Agent is designed for real-time embedded environment. It is designed to work with any TCP/IP stack and can be easily integrated with your IP stack of choice with no need for OS services.

More information can be found on the DMH Website at http://www.dmhsoftware.com/.