Keil Logo

STMicroelectronics STM32F205RG

The STMicroelectronics STM32F205RG is a Core - ARM 32-bit Cortex-M3 CPU - 120 MHz maximum frequency, 150 DMIPS/1.25 DMIPS/MHz - Memory protection unit Memories - Up to 1 Mbyte of Flash memory - Up to 128 + 4 Kbytes of SRAM - Flexible static memory controller (supports Compact Flash, SRAM, PSRAM, NOR, NAND memories) - LCD parallel interface, 8080/6800 modes Clock, reset and supply management - 1.8 to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - 4 to 25 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC - 32 kHz oscillator for RTC with calibration - Internal 32 kHz RC with calibration Low power - Sleep, Stop and Standby modes - VBAT supply for RTC, 20 × 32 bit backup registers optional 4 KB backup SRAM 3 × 12-bit, 0.5 us A/D converters - up to 24 channels - up to 6 MSPS in triple interleaved mode 2 × 12-bit D/A converters General-purpose DMA - 16-stream DMA controller centralized FIFOs and burst support Up to 17 timers - Up to twelve 16-bit and two 32-bit timers Debug mode - Serial wire debug (SWD) & JTAG interfaces - Cortex-M3 Embedded Trace Macrocell Up to 140 fast I/O ports with interrupt capability - 51/82/114/140 I/Os, all 5 V-tolerant Up to 15 communication interfaces - Up to 3 × I2C interfaces (SMBus/PMBus) - Up to 6 USARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) - Up to 3 SPIs (30 Mbit/s), 2 with muxed I2S to achieve audio class accuracy - 2 × CAN interfaces (2.0B Active) - SDIO interface Advanced connectivity - USB 2.0 FS device/host/OTG controller with on-chip PHY - USB 2.0 HS/FS device/host/OTG controller with dedicated DMA on-chip FS PHY and ULPI - 10/100 Ethernet MAC with dedicated DMA supports IEEE 1588v2 hardware, MII/RMII 8- to 14-bit parallel camera interface - up to 27 Mbyte/s at 27 MHz or 48 Mbyte/s at 48 MHz CRC calculation unit, 96-bit unique ID Analog true random number generator.

[Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Evaluation Boards
JTAG Debuggers
Data Sheets
Data Sheet
3,604,574 bytes
Generic User Guide
1,364,135 bytes
Reference Manual
14,679,939 bytes
Technical Reference Manual
2,467,498 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Device Programmers
MDK Middleware
The following middleware components are pre-configured in MDK-Professional
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.