STM32 USB Mass Storage Device Example

The STM32 USBMem example program shows how to configure and use the USB peripheral of STMicroelectronics STM32F103xx microcontroller.

This USB example project implements a Mass Storage Device (Memory Stick) that connects via the USB interface to the PC.  A Mass Storage Device does not require any special USB driver, since the support is already built into Windows 2000 and Windows XP. Therefore Mass Storage Devices can be directly connected to the computer.

The configuration of the clocks is done using the Configuration Wizard in file STM32_Init.c.

The example is tested with the Keil Evaluation Board MCBSTM32.

Refer to Running USBMEM for information on how to operate this example project.