Infineon XE161FU-8F

The Infineon XE161FU-8F is a 2K Bytes Dual-port RAM for Register Sets and System Stack, 8K Bytes stand-by RAM (SBRAM), 2K Bytes data RAM (DSRAM), 4K Bytes program/data RAM (PSRAM), 64K Bytes Program Flash, Interrupt system with 16 priority levels and 96 interrupt sources, Intelligent On-chip Peripheral Subsystems, Peripheral Event Controller with 8 channels, 1 12-Bit ADC Units with 10 channels, 1 Universal Serial Interface Channel Module (USIC) with 2 serial channels, 1 Enhanced Capture Compare Unit 6 (CCU6), 1 General Purpose Capture Compare Unit (CAPCOM2), 33 Digital I/O lines, Debug and Emulation Control Blocks.

Development Tools Compiler, Assembler, Linker, Debugger CA166 Compiler Kit Keil PK166 Professional Developer's Kit Keil JTAG Debuggers DAP miniWiggler Infineon ULINK2 Keil Data Sheets Instruction Set Manual 5,532,154 bytes Programmer's Guide 2,204,728 bytes System Units User's Manual 4,902,800 bytes Application Notes C167 DC Motor Speed Control Hitex Header Files XE161FU.H 356 bytes FLASH Utilities FLASHit hse Electronic DAP miniWiggler Infineon ULINK2 Keil

Real-Time OS Advanced RTX166 Real-Time Kernel Keil RTX166 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (16 channels) Asynchronous/Synchronous Serial Interface ASC0 Capture/Compare Unit CAPCOM1 with T0 and T1 Capture/Compare Unit CAPCOM2 with T7 and T8 (P1H.4-7 Inputs Only) Clock Managment with PLL (Without Decimal Factors) CPU with System Configuration High-Speed Synchronous Serial interface SSC Interrupts NMI PEC Port 0 (2 x 8-bit I/O) Port 1 (2 x 8-bit I/O) Port 2 (16-bit I/O with Open Drain) Port 3 (15-bit I/O with Open Drain) Port 4 (8-bit I/O) Port 5 (16-bit Input) Port 6 (8-bit I/O with Open Drain) Port 7 (8-bit I/O with Open Drain) Port 8 (8-bit I/O with Open Drain) PWM (4 channels) Reset Configuration Timer Block GPT1 (T2, T3, T4) Timer Block GPT2 (T5, T6) Traps Watchdog Timer AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil MON166 Driver Keil