Dallas Semiconductor DS5240

• PK51 Professional Developer's Kit
  Keil

• Configuring Keil PK51 for 24-bit Contiguous Mode
  Maxim Integrated

• 8051 /INT0 External Interrupt Example Program
• 8051 Bit I/O Example Program
• 8051 Counter 0 Example Program
• 8051 Memory Write Example Program
• 8051 Port I/O Example Program
• 8051 Timer 0 Mode 1 Example Program
• 8051 Timer 1 Mode 2 Example Program
• ISR-Driven Serial I/O V2

• iC1000 PowerEmulator
  iSystem
• MetaICE-XF 8051 In-Circuit Emulator
  Metalink Corporation

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

• Clock Divider and Multiplier
• External Memory Stretch Cycle
• Interrupts 15S/2L (Including External)
• Port 0
• Port 1
• Port 2
• Port 3
• Power Saving Modes (Idle and Power Down)
• Ring Oscillator
• Serial UART 0 (Enhanced Interface)
• Serial UART 1 (Enhanced Interface without T2 as BRG)
• Timer 0
• Timer 1
• Timer 2 (Extended Timer 2)
• Timer Rate Control ; 4 Clocks Per Machine Cycle
• Watchdog Timer

The following on-chip peripherals are not simulated.

• Boot Loader: ACON.6, BP, IA
• CRC Generator: CRC1, CRC2, CRC3, CRC4
• Encryption (PEK1, PEK2, DEK) and Decryption (PBDD, PBDC)
• Flash Program Memory:FLMC
• Memory Management Unit: ACON.7, MSIZE, MCEN, DMOS, MCON, RAMST, ROMST, MXAH
• Modular Arithmetic Accelerator: MACT, MAS0, MAS1
• Port 4: P4
• Random Number Generator: RNR
• Real-Time Clock: TRIM, RTASS, RTAS, RTAM, RTAH, RTCC, RTCSS, RTCS, RTCM, RTCH, RTCD0, RTCD1
• Reset Control: RAR, RCR, RTR
• Self Destruct Interrupt: PMR.1, PMR.0
• User DES Engine: UDESD, UDESC

The following AGSI Drivers are available for the Keil Software µVision Simulator.

• Proteus VSM
  Labcenter Electronics
• 8051 State Machine
  MEBA
• I²C Simulation
  MEBA
• LCD Simulation (HD44780 Controller)
  MEBA
• LED simulation
  MEBA
• Signal Generator
  MEBA

The following AGDI Drivers are available for the Keil Software µVision Debugger.

• Keil MON390 Driver
  Keil