Phytec 16. phyCORE-89C51Rx2 System on Module (SOM)

The phyCORE-89C51Rx2 supports a variety of new Philips 44-pin 80C51-compatible microcontrollers featuring on-chip Flash with In-System Programming (ISP) capability. Other controller features include four 8-bit I/O ports; three 16-bit timer/event counters; a multi-source, four-priority-level nested interrupt structure; an enhanced UART and on-chip oscillator and timing circuits. The board's standard memory configuration features 32 KB external SRAM and 64 KB on-chip Flash for storage of user code. PHYTEC FlashTools support in-system (ISP) programming. Three free Chip-Select signals enable connectivity to external peripherals. The module communicates by means of an RS-232 interface (optionally configurable as RS-485), operates within a standard temperature range of 0 to 70 degrees C. and requires a low 5 V. power source.

http://www.phytec.com/products/sbc/8051/phyCORE-89C66x.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.