Phytec 24. miniMODUL-515C System on Module (SOM)

The miniMODUL-515/CAN is PHYTEC's first 8-bit miniMODUL to support Full 2.0B CAN. The C515C was developed using ACMOS technology, rendering the controller highly useful in applications where power consumption and dissipation are critical. The board offers 32 (to 160) KB SRAM and 128 (to 512) KB Flash enabling direct on-board programming with help of the included PHYTEC FlashTools firmware. Flexible memory mapping is enabled by software. All controller signals - including an 8-channel A/D-converter with 8/10-bit resolution, three programmable Timers/Counters and the CAN interface - extend to standard-width (2.54 mm.) header pin rows aligning three edges of the board. The board communicates by means of an RS-232 transceiver, operates within a standard industrial temperature range of 0... 70° C. and requires a low +5V./ 100 mA. power source.

http://www.phytec.com/products/sbc/8051/miniMODUL-515C.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.