Phytec 22. microMODUL-8051 System on Module (SOM)

The microMODUL-8051 attains its matchbox-size via the advanced SMD- and multilayer technology and can accommodate a variety of PLCC-44 or QFP-44 packaged 80C32/8051 compatible controllers. A complex logic chip allows the microMODUL to be populated by most 8051-compatible controllers in a 44-pin PLCC or QFP package. The standard memory configuration of the board features 32 (up to 128) KB SRAM and 128 (up to 512) KB Flash for storage of user code. The Flash device enables on-board programming with the included PHYTEC FlashTools firmware. All applicable controller and logic signals extend to standard-width (2.54 mm.) pin header rows located on three edges of the board, allowing it to be plugged as a "big chip" into target applications and standard bread/carrier boards. Free Chip-Select signals enable connectivity to external peripherals. The module communicates by means of an RS-232 transceiver (optionally configurable as RS-485). It operates within a standard industrial temperature range of 0 to 70° C and requires a low 5 V./ 150 mA. power source.

http://www.phytec.com/products/sbc/8051/microMODUL-8051.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.