Phytec 08. phyCORE-167 HS/E System on Module (SOM)

The phyCORE-167 HS/E (High-Speed Ethernet) supports various 144-pin devices in MQFP package from Infineon. The board offers up to 1 MB external SRAM, 2 MB external Flash and supports on-board in-system (ISP) Flash programming. If populated with the C167CS (optionally C167CR), the module offers dual on-chip 2.0B CAN. The C167Cx provides 111 I/O-lines and a supplemental UART for a second serial (modem-capable) interface. The Cirrus Logic C58900A controller enables Ethernet communication with a transmission rate of 10 Mbit/s. The minimal form factor and enhanced EMI characteristics of the phyCORE render the module an excellent subassembly to drive OEM applications.

http://www.phytec.com/products/sbc/C166-xc166-st10-xa/phyCORE-167HS-E.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.