Phytec 18. phyCORE-ADuC8xx System on Module (SOM)

The phyCORe-ADuC812 supports the Analog Devices ADuC-812 (optionally ADuC814, ADuC816, ADuC824) microcontroller (TQFP-52 package). This controller features on-chip A/D as well as D/A converters, a reference voltage supply and a temperature sensor. The ADuC812 boasts an 8-channel 12-bit A/D converter and dual 12-bit D/A converters. The optional ADuC824 offers a 12-bit D/A as well as 24- and 16-bit A/D converters with a total of five channels. The on-chip non-volatile memory consists of 8 KB CODE Flash and 640 bytes of DATA Flash. This is augmented by 128 (to 512) KB external Flash and 128 KB (to 1 MB) SRAM. The included PHYTEC FlashTools support In-System-Programming of the external Flash memory via the RS-232 interface. for networking purposes, the board can be populated with an optional SJA1000 CAN controller and 82C251 CAN transceiver. An RTC9564 Real-Time Clock and 4 (to 16) KB EEPROM can be addressed over the I²C Bus. The module also offers port expansion via eight TTL level inputs and eight TTL level outputs. Three Chip-Select signals enable connectivity to external devices.

http://www.phytec.com/products/sbc/8051/phyCORE-ADuC8xx.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.