Phytec 20. phyCORE-AT89C51CC01 System on Module (SOM)

The phyCORE-AT89C51CC01 supports the AT89C51CC01, a member of the C51 X2 family of 8-bit microcontrollers dedicated to CAN network applications. While remaining fully compatible with the 80C51 it offers a superset of this standard microcontroller. In X2 mode a maximum external clock rate of 20 MHz reaches a 300 ns cycle time. Besides the Full 2.0B CAN controller, the T89C51CC01 provides 32 KB Flash memory supporting In-System Programming (ISP), 2 KB Boot-Flash, 2 KB EEPROM and 1.2 KB RAM. The on-chip memory is augmented by 32 KB of external SRAM and 128 KB Flash. The controller's CAN and ADC signals are available to the user at the edges of the board. The included PHYTEC FlashTools support In-System-Programming of the external Flash memory via the RS-232 interface. The Atmel FLIP utility supports programming of the on-chip Flash memory.

http://www.phytec.com/products/sbc/8051/phyCORE-AT89C51CC01.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.