Phytec 06. phyCORE-ARM7/AT91M55800 A System on Module

Based on the Atmel AT91M55800A ARM7TDMI controller, the phyCORE-ARM7/AT91 offers processing power combined with low power consumption in a minimum form factor (60x53 mm). The AT91M55800A has a 32-bit RISC architecture with a high-density 16-bit instruction set. A large number of internal register banks enable very fast command execution, making the controller especially suited for real-time applications. Up to 16 MB Flash and 8 MB SRAM in µBGA-housing populate the module as external memory. The on-board twin CAN controller provides two fully configured 2.0B CAN interfaces, while a CS8900A Ethernet controller supports data transfer up to 10 Mbit/s. View the complete list of features.

The standard module configuration comes complete with a JTAG interface for download of user code and debugging purposes. Other chip-level features include an 8-channel ADC with 10-bit resolution and a 2-channel DAC with 10-bit resolution. All applicable logic signals are broken out at two dual-row high-density (0.635 mm) connectors. View the Rapid Development Kits available for this SOM.

http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM7-AT91M55800A.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.