Phytec 14. miniMODUL-167 System on Module (SOM)

The miniMODUL-167 is intended for use in memory-intensive applications and in driving a CAN-bus interface. The size of a credit card (85 by 55 mm.), the standard board is populated with the Infineon C167CR controller and runs at a 20 MHz clock speed, delivering instruction cycles in 100 ns. The standard memory configuration boasts 256 KB (up to 2 MB) SRAM and Flash on-board for DATA and CODE storage. PHYTEC FlashTools enable easy on-board download of user code. The board also features a Real-Time Clock which, like the SRAM, can be buffered by an external battery. All controller signals and ports extend to 2.54 mm. pitch pin headers aligning three edges of the board. These pins provide a 16-bit bi-directional I/O port and 64+ free port lines, and a 16-channel ADC with 10-bit resolution. The module is mounted with an RS-232 transceiver supporting two serial interfaces and a CAN transceiver. The miniMODUL-167 has a standard temperature range from 0 to 70 degrees C. (optional extended range from -40 to 85 degrees C.) and requires a low 250 mA. power source.

http://www.phytec.com/products/sbc/C166-xc166-st10-xa/miniMODUL-167.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.