Phytec 15. phyCORE-591 System on Module (SOM)

The phyCORE-591 is populated with Philips P8xC591 controller which features CAN 2.0B on-chip via Philips PeliCAN, which offers both 11-bit and 29-bit message identifier support, an extended receipt buffer of up to 64 bytes and integrated protocol support for CANopen, DeviceNet and OSEK. These features render the P8xC591 an excellent solution for insertion in a wide spectrum of CAN applications. The CAN transceiver and serial EEPROM on the phyCORE module provide additional CAN support by enabling storage of configuration data (network parameters). The board's standard memory configuration features 128 KB SRAM and 128 (to 512) KB Flash for storage of user code. PHYTEC FlashTools support in-system (ISP) programming of the Flash device. Free Chip-Select signals enable connectivity to external peripherals. The module communicates by means of an RS-232 or RS-485 interface, operates within a standard temperature range of 0 to 70 degrees C. and requires a low 5 V. power source.

http://www.phytec.com/products/sbc/8051/phyCORE-591.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.