Phytec 09. phyCORE-XC161 System on Module (SOM)

The phyCORE-XC161 belongs to PHYTEC's phyCORE Single Board Computer module family and supports the XC16x controllers from Infineon in TQFP-144-50 housing. The Flash can easily be programmed on board. Support of the XC16x family "Single Chip Mode" provides the user with maximum flexibility for expansion via external peripherals. An additional feature is the possibility of connecting the CAN interface from within the address area, whereby direct external addressing of up to 16 MB address space is enabled. On-Chip Full 2.0B CAN, 99 I/O lines and two serial interfaces are additional board features. Data transfer rates of 10Mbit/s are possible with the on-board CS8900 Ethernet controller from Cirrus Logic. All controller and peripheral signals extend to two 100-pin, high-density Molex connectors on the underside of the phyCORE-XC161.

http://www.phytec.com/products/sbc/C166-xc166-st10-xa/phyCORE-XC161E.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.