Rigel Corporation RMB-166

The RMB-166 is an evaluation board for the Infineon 80C166 16-bit high-performance microcontroller in the square plastic quad-flat pack package. The microcontroller is configured to run at 40Mhz with no wait states. A 16-bit non-multiplexed data bus and a 16-bit non-multiplexed address bus are implemented. Several memory options are supported. The default configuration is the 64K RAM and no EPROM mode. In this mode, the monitor program or user program is downloaded to RAM using the 80C166 bootstrap feature. A set of option headers, decoded by GAL devices makes the RMB-166 a flexible hardware platform. All system address, data, and control lines as well as microcontroller ports 2, 3, and 5 are terminated at two 50-post headers. Both 80C166 serial ports are available to the user at RS-232 levels through two DB-9 sockets and a 6-post connector. Serial port 0 is used to communicate to a PC host.

http://www.rigelcorp.com/rmb166.htm

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.