For Texas Instruments MSC1211Y4 — Watchdog Timer
Simulation support for this peripheral or feature is comprised of:
- Dialog boxes which display and allow you to change peripheral configuration.
These simulation capabilities are described below.
Watchdog Timer Dialog
The Watchdog Timer dialog shows the current state of the on-chip
Watchdog Timer. You can change watchdog settings using the controls
in this dialog.
PDWDT (Power-Down Watchdog Timer Control) is set to put
the Watchdog Timer in power down mode.
WDTCON (Watchdog Timer Control Register) contains the
current watchdog timer control bit settings:
EWDT (Enable Watchdog Timer) is set to allow the
Watchdog Timer to reset itself.
RWDT (Reset Watchdog Timer) is set to reset the Watchdog
Timer timeout count.
DWDT (Disable Watchdog Timer) is set to disable Watchdog
Expire in holds the number of milliseconds before the
Watchdog Timer times out.