|
|||
| Products Download Events Support Videos | |||
µVision® IDE
µVision® Debugger
- Overview
- Viewing Code & Data
- Executing Code
- Advanced Analysis Tools
- Core Simulation
- Peripheral Simulation
- Target Debugging
Further Information
µVision® IDE & Debugger
Peripheral Simulation
The µVision debugger simulates the on-chip peripherals of numerous microcontrollers. When you select a microcontroller from the device database to configure your project, µVision automatically configures the debugger's peripheral simulator for you. With its logical and timing simulation, it is possible to test an application before the target hardware is even completely designed. The simulator makes it easy to test hardware defects and critical situations which are difficult to debug with real hardware.
D/A Converter Simulation
I/O Port Simulation
CAPCOM Simulation
CAN Simulation
I²C Simulation
FLASH Memory Simulation
|
A/D Converter A/D Converter Simulation allows you to easily configure the A/D Converter and simulate voltages are corresponding device pins. |
|
D/A Converter D/A Converter Simulation allows you to output analog voltages and monitor them using debugger scripts. |
|
I/O Port I/O Port Simulation allows you convenient dialogs to configure and monitor I/O port status. |
|
Timer/Counter Timers and Counters are accurately simulated allowing your to control and measure events precisely. |
|
Watchdog Timer Watchdog Timer Simulation helps you determine how often and where to reset the watchdog in your application. |
|
Capture/Compare Capture/Compare Simulation allows you to view and change the configuration of the capcom units fond on many devices. |
|
Serial Communications Serial Communications Simulation provides a serial window and dialog that help you configure and communicate using your device's on-chip UART. |
|
CAN Communications CAN Communications Simulation provides dialogs for CAN configuration and message logging. Debugger scripts may be used to generate CAN bus traffic and respond to simulated message traffic. |
|
I²C Communications I²C Communications Simulation allows you to configure I²C and view messages sent and received. Debugger scripts may be used to generate and respond to I²C messages. |
|
SPI Communications SPI Communications Simulation allows you to simulate master and slave SPI devices. |
|
FLASH Memory FLASH Memory Simulation gives you access to all control registers of on-chip FLASH/EE memory. All memory contents may be viewed and modified in real-time. |
|
Power-Saving Modes Power-Saving Modes Simulation simulates the Idle and Power Down Modes found on many devices. |
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
