Device Database®

Atmel AT91SAM7X256

The Atmel AT91SAM7X256 is an ARM7TDMI based High-performance 32-bit RISC Microcontroller with Thumb extensions, 256K Bytes Flash, 64K Bytes SRAM, USB 2.0, Ethernet MAC 10/100 base-T, CAN Interface, Memory Controller, Reset Controller, Clock Generator, Debug Unit, Power Management Controller, Advanced Interrupt Controller, Periodic Interval Timer, Windowed Watchdog, Real-time Timer, Two Paralllel Input/Output Controllers, Thirteen Peripheral DMA Controller Channels, Synchronous Serial Controller,Two USARTs, Two Master/Slave Serial Peripheral Interfaces, 3-channel 16-bit Timer/Counters, 4-channel 16-bit PWM, 2wire Interface, 8-channel 10-bit ADC.

[Chip Vendor][Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Data Sheets
Datasheet for the Atmel AT91SAM7X256
Datasheet
7,987,677 bytes
Summary for the Atmel AT91SAM7X256
Summary
533,751 bytes

Get Adobe Acrobat Reader

Application Notes
Header Files
Example Code
Evaluation Boards
JTAG Debuggers
FLASH Utilities
Device Programmers
MDK Middleware
The following middleware components are pre-configured in MDK-Professional
Real-Time OS
Simulated Features

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

The following on-chip peripherals are not simulated.

  • Embedded Flash Controller
  • External Bus Interface
  • Pulse Width Modulation Controller
  • Serial Peripheral Interface
  • Synchronous Serial Controller
  • Two-wire Interface
  • USB Device Interface