MCBXC800 User's Guide

Home

The MCBXC800 User's Guide describes the MCBXC800 Evaluation Boards for the Infineon XC800 microcontroller device series and the operation of the related µVision Debug Drivers. It contains detailed operating instructions for the various hardware platforms.

• Introduction gives an overview of the MCBXC800 board, hardware and software requirements, where to find information quickly, and where to find Technical Support.
• MCBXC866 Setup shows how to connect the MCBXC886 Board to the Keil ULINK, describes the jumpers and connectors.
• MCBXC866 Theory of Operation explains the components of the MCBxc866 Board in detail.
• MCBXC88x Setup shows how to connect the MCBXC88x Board to the Keil ULINK, describes the jumpers and connectors.
• MCBXC88x Theory of Operation explains the components of the MCBxc88x Board in detail.
• Writing Programs describes how to write programs, download to flash, and configure your project for debugging for the MCBXC866 Board.
• Example Programs lists example programs available on the installation CD and step-by-step instructions on building a program on the MCBXC8xx boards. Includes the BLINKY example program.
• Infineon XC800 Flash Download Utility shows how to use the Infineon Download Utility through a standard COM port.
• Infineon XC800 Target Driver shows how to debug, program, connect, and configure the Infineon Target Driver.
• Infineon DAvE shows how to use Infineon DAvE together with Keil µVision and the C51 Compiler.