|
||
| Products Download Events Support Videos | ||
Technical Support
On-Line Manuals
MCBTWRK60 User's Guide
Introduction
Setup
Theory of Operation
Writing Programs
Example Programs
Stand Alone Utility
Downloading with the Flash Magic utility requires the following steps to download code to the Kinetis K60's on-chip Flash ROM.
To configure the MCBTWRK60 Tower System for Flash programming, select and start Programs — Flash Magic — Flash Magic.
-
Select COM 1 for the COM Port, specify 19200 as the Baud Rate, and select the Kinetis K60 as the Device.
Enable Erase blocks used by Hex File.
-
Select the Hex File, for example: root\ARM\BOARDS\\KEIL\\TWR-K60N512\BLINKY\BLINKY.HEX.
-
In the Options — Advanced Options dialog,
select the Hardware Config tab, then check the Use DTR
and RTS to control RST and P0.14 check box.
-
Click Start to download the Hex File into the Flash ROM of the LPC23x8.
In case of errors, check the COM connection and jumper settings
- RST & ISP = ON
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
 |
||||