EPM900

Home

The Keil EPM900 Emulator is an in-circuit emulator and parallel Flash programmer for the Philips P89LPC9xx family of devices. The EPM900 connects directly to the µVision Debugger and provides full control over the user program execution.

The EPM900 User's Guide describes the EPM900 Board and contains detailed operating instructions for the hardware.

• Introduction gives an overview of the EPM900 Emulator Board, hardware and software requirements, where to find information quickly, and where to find Technical Support.
• Setup shows the EPM900 Board components, how to connect, configure, and use the board, and describes the jumpers.
• Theory of Operation explains the components of the EPM900 board in detail.
• Using the EPM900 describes how to configure and use your EPM900 in emulator or programmer modes.