MCB900: Using MCB900 with a full C51 Package

Information in this article applies to:

• MCB900 Evaluation Boards

QUESTION

I want to use an MCB900 with my full C51 package.

Do I have to install the 'µVision LPC Development Studio' which is shipped with the board?

ANSWER

No, but the full version must be Version 7.05 or higher.

If you want to use ISP, you may need to Install Flash Magic, which can be found on the CD-ROM.

MORE INFORMATION

• Refer to Software Requirements in the MCB900 User's Guide.
• Application Note: Using Flash Magic with the 89LPC932 available under https://www.esacademy.com/software/flashmagic/appnotes/89LPC932AppNote.pdf

SEE ALSO

• MCB900: Problems With In-System Programming Using FlashMagic

Last Reviewed: Thursday, February 25, 2021