Keil Logo

RL-ARM SD/MMC File Demo for MCB2929

NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT MDKpro V4.23 INSTALLED!

This is a Real-Time Library (RL-ARM) Flash File System file manipulation example. You can create, read, copy and delete files from a SD/MMC Flash Memory Card. Also formatting the card is possible. This example project is designed to work with Keil MCB2929 Evaluation Board.

To use this example:

  • Connect ULINK2 to the MCB2929 Evaluation Board and power the board.
  • Connect MCB2929 Board COM port to PC COM port via serial cable.
  • start Hyperterminal session.
    (115200 baud, 8-bits, no parity, 1 stop bit, flowcontrol none).
  • In uVision - load the project file and execute Flash - Download.

In the Hyperterminal window you now have a commandline interface to manipulate files on a SD/MMC Flash Memory Card plugged into MCBSTM32C Evaluation Board. Type Help for a list of available commands.

The SD_FILE program is a standalone application loaded into on-chip flash and available for targets:

  • MCB2929:
    Standalone application for Keil MCB2929 Board using COM port as a communication interface.
    Connect a serial cable to RS232 UART port using HyperTerminal at 115200 baud, 8-bits, no parity, 1 stop bit, flowcontrol none.

This pre-compiled version is for target "MCB2929" and may be downloaded using an evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 4.23 or later is required.

MCB2929_SD_FILE.ZIP (101K)
Monday, March 12, 2012
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.