In-Application Programming (IAP) for Philips LPC2000

The IAP project shows how to use IAP function calls for In-Application Programming of the on-chip Flash ROM.

At start of the program there is a delay loop for debugger synchronization. For details refer to http://www.keil.com/support/docs/2767.htm.

This demo first programs some values into the Flash ROM and Erases then the content of this Flash ROM.

The IAP program is available in different targets:

• MCB2100_V162 runs on the MCB2100 Board with disabled PLL to bypass the IAP.1 problem described in the Philips errata sheet (runs on boot loader before V1.63).
• MCB2100_V163 runs on the MCB2100 Board with enabled PLL.
• MCB2130 runs on the MCB2130 Board.

This program may be even tested in the uVision Simulator when using CARM Version 2.20 or higher.