Keil Logo

Infineon C515/80c535 A/D Example Program

This example program shows how to configure and use the A/D Converter of the following microcontrollers:

  • Infineon SAB80C515
  • Infineon SAB80C535

After configuring the A/D Converter, the program reads A/D channel 0 and outputs the converted value using the serial port.

To run this program...

  1. Select the device from the pull-down target list
  2. Build the project (Project - Build Target)
  3. Start the uVision Debugger
  4. Open the Serial Window (View - Serial Window 1)
  5. Open the Toolbox (View - Toolbox)
  6. Click Go or Run (F5)
  7. Click on the Toolbox buttons to change input voltages

A debug script (debug.ini) creates buttons that set different analog values in A/D channels. As the program runs, you will see the A/D input and output change.

Other buttons create signals that generate sine wave or sawtooth patterns as analog inputs. µVision3 users may enable the built-in Logic Analyzer to view, measure and compare these input signals graphically.

C515_ADC.ZIP (8.3K)
Wednesday, July 14, 2004
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.