Keil Logo

GigaDevice GD32F303RE

ARM Cortex-M4, 120 MHz, 512 kB ROM, 64 kB RAM

GD32F303 - ARM Cortex-M4 Core Frequency up to 120 MHz Flash access zero wait state Single-cycle multiplier and hardware divider Memories Flash size from 128KB to 3072KB SRAM size is 96 KB with HW parity checking 6KB ISP loader ROM

Core ARM Cortex-M4, FPU MPU 120 MHz, 918 -channel General Purpose DMA with Centralized FIFO and Burst Support
  • NVIC:NVIC with 91 interrupt sources
  • DMA:8 -channel General Purpose DMA with Centralized FIFO and Burst Support
  • Processor:Cortex-M4, FPU MPU 120 MHz
  • RNG:True Random Number Generator
  • Other:1 x CRC Calculation Unit
Memory 64 kB RAM, 512 kB ROM
  • ROM:512 kB
  • RAM:64 kB
Clock & Power 2.6 V .. 3.6 V, 120 MHz
  • External Oscillator:4 MHz 32 MHz External Crystal Oscillator
  • Internal RC:16 MHz Internal RC Oscillator
  • Supply Voltage:2.6 V .. 3.6 V Operating Voltage
  • Power Modes:4 Power Modes: Run, Sleep, Deep-Sleep, Standby
  • Maximum Clock Frequency:120 MHz,
  • RTC:32 kHz RTC with 32 kHz calibrated Oscillator and Battery Backup
  • PLL:3 Hz Internal PLL
Communication SPI, I2C, UART, I2S, CAN, USART, USB, OTG, Multi-Purpose Serial Peripheral
  • SPI:6 x SPI Interface
  • I2C:3 x Low-Power I2C
  • UART:4 x High-Speed UART Interface
  • I2S:5 x I2S Interface
  • USART:4 x High-Speed USART Interface
  • CAN:2 x CAN 2.0b Controller
  • USB, OTG:2 x High-Speed/Full-Speed USB OTG with PHY
  • Multi-Purpose Serial Peripheral:4 x Multi-Purpose Serial Interface Module: I2C, I2S, SPI, USART
Timer/Counter/PWM 2 x 32-bit Timer, 8 x 16-bit Timer, 2 x 16-bit Timer, 2 x 16-bit Timer, 1 x 24-bit Timer
  • Watchdog:2 x Watchdog timer
  • Timer/Counter:2 x 32-bit 32-bit General Purpose Timer
  • Timer/Counter:8 x 16-bit 16-bit General Purpose Timer
  • Timer/Counter:2 x 16-bit Advanced Timer
  • Timer/Counter:2 x 16-bit Basic Timer
  • Timer/Counter:1 x 24-bit SysTick Timer
Analog 3-channel 24 bit ADC
  • ADC:3-channel x 24 bit ADC
  • Temperature Sensor:1 x Temperature sensor
I/O & Package -40 °C .. 85 °C
  • Operating Temperature Range:-40 °C .. 85 °C Extended Operating Temperature Range
  • I/Os:140 IO pins
  • External Interrupts:22 External interrupt
  • Other:3 x My other Interface
Development Tools
CMSIS Drivers No CMSIS-Driver in Device Family Pack.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.