For NXP (founded by Philips) LPC1769 — Real Time Clock
Simulation support for this peripheral or feature is comprised of:
These simulation capabilities are described below.
Real-time Clock Dialog
The Pin Connect Block Dialog allow the user to configure pins P0.0 - P0.31 of the MCU based on functions required. Selecting a pin allows you to change the
The Real Time Clock Dialog shows the current state of the on-chip real-time clock (RTC). You can change the RTC settings using the controls in this dialog.
Clock Tick Counter
Counter Increment Interrupt
Alarm This group contains the alarm values for triggering alarm interrupts. The alarm mask bits (AMR) must be reset for an alarm interrupt to occur.
function for that pin.
Open Drain Mode Control
of your data.