For NXP (founded by Philips) LPC2294/01 — Real Time Clock
Simulation support for this peripheral or feature is comprised of:
These simulation capabilities are described below.
Real Time Clock Dialog
The Real Time Clock Dialog shows the current state of the on-chip real-time clock (RTC). You can change the RTC settings using the controls in this dialog.
Clock Tick Counter
Counter Increment Interrupt
Alarm This group contains the alarm values for triggering alarm interrupts. The alarm mask bits (AMR) must be reset for an alarm interrupt to occur.
Get more information about the
Peripheral Simulation Capabilities
of the µVision Debugger.
of your data.