Keil Logo

Peripheral Simulation

For STMicroelectronics STR755FV1 — Real Time Clock (RTC)

Simulation support for this peripheral or feature is comprised of:

  • Dialog boxes which display and allow you to change peripheral configuration.
  • VTREGs (Virtual Target Registers) which support I/O with the peripheral.

These simulation capabilities are described below.

Real Time Clock Dialog

Real Time Clock

The Real Time Clock Dialog shows the current state of the on-chip real-time clock (RTC). You can change the RTC settings using the controls in this dialog.

Control

  • RTC_CRH  (RTC Control Register High) contains the bit used to mask Global, Overflow, Alarm and Second Interrupt requests.
  • GEN (Global Interrupt Enable) is set enable global interrupts.
  • OWEN (Overflow Interrupt Enable) is set enable overflow interrupts.
  • AEN (Alarm Interrupt Enable) is set enable alarm interrupts.
  • SEN (Second Interrupt Enable) is set enable second interrupts.
  • RTC_CRL (RTC Control Register Low) contains the following bit settings:
  • RTOFF (RTC operation OFF) is set when the last write operation to the RTC registers completes.
  • CNF (Configuration Flag) is set enter configuration mode to allow new values to be written to RTC_CNT, RTC_ALR or RTC_PRL registers.
  • GIR (Global Interrupt Request) is set when a global interrupt request is pending.
  • OWIR (Overflow Interrupt Request) is set when a overflow interrupt request is pending.
  • AIR (Alarm Interrupt Request) is set when a alarm interrupt request is pending.
  • SIR (Second Interrupt Request) is set when a second interrupt request is pending.

Prescaler

  • RTC_PRLH (RTC Prescaler Load Register High) contains the 4 high-order bits of the RTC prescaler reload value.
  • RTC_PRLL (RTC Prescaler Load Register Low) contains the 16 low-order bits of the RTC prescaler reload value.
  • RTC_DIVH (RTC Clock Divider High) contains the 4 high-order bits of the RTC clock divider.
  • RTC_DIVL (RTC Clock Divider Low) contains the 16 low-order bits of the RTC clock divider.

Counter & Alarm

  • RTC_CNTH (RTC Counter Register High) contains the 16 high-order bits of the RTC counter register.
  • RTC_CNTL (RTC Counter Register Low) contains the 16 low-order bits of the RTC counter register.
  • RTC_ALRH (RTC Alarm Register High) contains the 16 high-order bits of the RTC alarm register .
  • RTC_ALRL (RTC Alarm Register Low) contains the 16 low-order bits of the RTC alarm register.

Real Time Clock Input VTREG
Data Type: unsigned long


Get more information about the
Peripheral Simulation Capabilities
of the µVision Debugger.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.