Keil Logo

Peripheral Simulation

For Infineon C515C-8R / -8E — System Configuration

Simulation support for this peripheral or feature is comprised of:

  • Dialog boxes which display and allow you to change peripheral configuration.

These simulation capabilities are described below.

System Configuration Dialog

System Configuration

The System Configuration Dialog controls the various system-wide functions of the microcontroller. These functions are listed below:

System Control

  • SYSCON (System Control Register) contains the register mapping, external RAM and other configuration settings.
  • CLK (Clockout Enable) is set output the system clock on the P1.6/CLKOUT pin.
  • RMAP (Special Function Register Map) is set to enable access to the mapped SFR area. It is reset to enable access to the standard SFR area.
  • EALE (Enable ALE Output) is set to allow generation of the Address Latch Enable (ALE) signal.
  • PDIR (Port Direction Enable) is set to read or write the direction registers on the next instruction cycle. The hardware automatically resets this bit on the second instruction cycle after the bit is set.
  • PMOD (Port 5 Mode Selection) is set to select the Port 5 bidirectional port structure.
  • XMAP0 (Global XRAM/CAN Controller Access Enable/Disable Control) is set to disable access to XRAM and CAN controller. Resetting this bit enables access to these devices.
  • XMAP1 (XRAM/CAN Controller Visible Access Control) is set to allow address and data information during XRAM or CAN accesses to be externally visible using ports 0 and 2.

Oscillator & CPU Clock

  • XTAL Freq. [Hz] is the oscillator frequency at XTAL.
  • CPU Clock [Hz] is the CPU clock rate based on the XTAL frequency.
Get more information about the
Peripheral Simulation Capabilities
of the µVision Debugger.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.