Keil Logo

Silicon Laboratories, Inc. EFM8LB12F32E-QFP32

The Silicon Laboratories, Inc. EFM8LB12F32E-QFP32 is a High-speed pipelined CIP-51 (8051) MCU, 32KBytes Flash, 256 Bytes Data RAM, 2048 Bytes XRAM. 28 Digital I/O lines, 1 14-bit ADC Unit with 12 Channels (up to 900 ksps), 4 12-bit DACs 4 Configurable Logic Units 2 Low-current analog comparators with adjustable reference [up to 10 (CMP0) or 9 (CMP1) external positive\negative inputs], 6-Channel Programmable Counter Array (PWM, Clock Generation, Capture/Compare) 2 UARTs (up to 3 Mbaud), 1 SPI (Master/Slave up to 12 Mbps), 1 SMBus / I2C (up to 400 kbps), and 1 High-Speed (3.4 Mbps) I2C-Slave bus. 1 16-bit CRC unit, 6 16-bit general-purpose timers, 1 Watchdog timer, On-Chip: Low-dropout (LDO) regulator, 3 x Oscillators (80kHz, 24,5MHz 72MHz), Power-On reset circuit, brownout detector, and the non-intrusive Silicon Labs 2-Wire (C2) debug interface.

[Chip Vendor] [Distributors]

Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

The following on-chip peripherals are not simulated.

  • Crossbar
  • External & On-Chip memory
  • Interrupts (Including External)
  • Port 0
  • Port 1
  • Port 2
  • Port 3
  • Power Saving Modes (Idle and Power Down)
  • Serial UART 0 (Enhanced Interface)
  • Timer 0
  • Timer 1
  • Timer 2
AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.


  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.