Keil Logo

Silicon Laboratories, Inc. EFM8BB10F8G-QSOP24

The Silicon Laboratories, Inc. EFM8BB10F8G-QSOP24 is a High-speed pipelined CIP-51 (8051) MCU with 25 MIPS Throughput, 8KBytes Flash, 256 Bytes Data RAM, 256 Bytes XRAM. 18 Digital I/O lines, 1 12-bit ADC Unit with 16 Channels, 2 Low-current analog comparators with adjustable reference and 16 inputs, 3-Channel programmable counter array (PCA) supporting PWM, capture/compare, and frequency output modes, 4 x 16-bit general-purpose timers, Independent watchdog timer (WDC), UART, SMBus/I2C, SPI Bus, 16-Bit CRC Unit, On-Chip: Low-dropout (LDO) regulator, Power-On reset circuit, brownout detector, and a non-intrusive debug unit. AEC-Q100 qualified.

[Chip Vendor] [Distributors]

Data Sheets
Datasheet
1,065,473 bytes
Errata
573,860 bytes
User Manual
2,224,297 bytes

Get Adobe Acrobat Reader

Header Files
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

The following on-chip peripherals are not simulated.

  • Crossbar
  • External & On-Chip memory
  • Interrupts (Including External)
  • Port 0
  • Port 1
  • Port 2
  • Port 3
  • Power Saving Modes (Idle and Power Down)
  • Serial UART 0 (Enhanced Interface)
  • Timer 0
  • Timer 1
  • Timer 2
AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.


  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.