Keil Logo

Silicon Laboratories, Inc. C8051T627

The Silicon Laboratories, Inc. C8051T627 is a High-speed 8051 MCU with up to 48 MIPS Throughput, 48MHz System Clock, with 32KBytes ISP Flash, 3072 Bytes XRAM, 256 Bytes RAM, up to 18 interrupts with two priority levels, up to 24 I/O ports, 4 16-Bit Timer/Counters, Watchdog timer, 1 10-Bit SAR-ADC Unit with 22 multiplexed input channels and up to 500 ksps, 2 Voltage comparators, 1 USB 2.0 full speed unit with 1KByte FIFO, 1-SMBus, Enhanced SPI, 2 UARTs. On-Chip peripherals: temperature sensor, Calibrated 48MHz oscillator, Calibrated 80kHz oscillator, VDD monitor and Missing clock detector, and non-intrusive debug interface (2-Wire SiLABs C2 interface).

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Data Sheets
Full Data Sheet
1,696,246 bytes
Short Data Sheet
69,794 bytes

Get Adobe Acrobat Reader

Header Files
Real-Time OS
Simulated Features
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

The following on-chip peripherals are not simulated.

  • Crossbar
  • External & On-Chip memory
  • Interrupts (Including External)
  • Port 0
  • Port 1
  • Port 2
  • Port 3
  • Power Saving Modes (Idle and Power Down)
  • Serial UART 0 (Enhanced Interface)
  • Timer 0
  • Timer 1
  • Timer 2
AGSI Drivers

The following AGSI Drivers are available for the Keil Software µVision Simulator.

AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.