Keil Logo

STMicroelectronics STM32F303VC

The STMicroelectronics STM32F303VC is a Core - ARM 32-bit Cortex-M4 CPU with FPU - single-cycle multiplication and HW division - DSP instruction - 72 MHz maximum frequency Operating conditions: - VDD, VDDA voltage range: 2.0 V to 3.6 V Memories - 128 to 256 Kbytes of Flash memory - Up to 40 Kbytes of SRAM - Routine booster: 8 Kbytes of SRAM on instruction and data bus CRC calculation unit Reset and supply management - Power-on/Power-down reset (POR/PDR) - Programmable voltage detector (PVD) - Low power modes: Sleep, Stop and Standby - VBAT supply for RTC and backup registers Clock management - 4 to 32 MHz crystal oscillator - 32 kHz oscillator for RTC with calibration - Internal 8 MHz RC with x 16 PLL option - Internal 40 kHz oscillator Up to 87 fast I/Os - All mappable on external interrupt vectors - Several 5 V-tolerant 12-channel DMA controller 4 ADCs 0.20 us (up to 39 channels) with selectable resolution of 12/10/8/6 bits 2 12-bit DAC channels 7 fast rail-to-rail analog comparators 4 operational amplifiers that can be used in PGA mode Up to 24 capacitive sensing channels Up to 13 timers - 1 32-bit timer and 2 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature encoder input - 2 16-bit 6-channel advanced-control timers, with up to 6 PWM channels, deadtime gen., emergency stop - 1 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime gen., emergency stop - 2 16-bit timers with IC/OC/OCN/PWM, deadtime gen., emergency stop - 2 watchdog timers - SysTick timer: 24-bit downcounter - 2 16-bit basic timers to drive the DAC Calendar RTC with Alarm, periodic wakeup from Stop/Standby Communication interfaces - CAN interface (2.0B Active) - 2 I2C Fast mode plus (1 Mbit/s) - Up to 5 USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) - Up to 3 SPIs, 2 with multiplexed half/full duplex I2S interface - USB 2.0 full speed interface - Infrared transmitter Serial wire debug, Cortex-M4 with FPU ETM, JTAG 96-bit unique ID.


Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Data Sheets
1,813,009 bytes
Generic User Guide
1,755,988 bytes
Reference Manual
13,140,101 bytes
Technical Reference Manual
935,507 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Real-Time OS
Simulated Features
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.