|
|||||||||||||||||
Product Information Device Database® Downloads Compliance Testing Distributors |
Nuvoton M058LANThe Nuvoton M058LAN is a + Core - ARM Cortex-M0 core runs up to 50MHz. - NVIC for the 32 interrupt inputs, each with 4-levels of priority. - Serial Wire Debug supports with 2 watchpoints/4 breakpoints. + Widely operating voltage range from 2.5V to 5.5V + Flash EPROM Memory - 32K bytes Flash Memory for program code. - 4kB flash for ISP loader - Support ISP/IAP program code update + SRAM Memory - 4K bytes embedded SRAM. + Clock Control - Build-in 22MHz OSC (Trimmed to 1%) for system operation - Low power 10KHz OSC for watchdog and wakeup sleep operation. - Support one PLL, up to 50MHz, for high performance system operation. - External 12MHz crystal input for precise timing operating. - External 32 kHz crystal input for RTC function and low power system operation. + GPIO - Four I/O modes (bi-direction, Push-Pull, Open-Drain, IN high impendence) + Timers - 4 sets of 24-bit timer with 8-bit pre-scaler. + Watch Dog Timer + PWM/Capture - up to four 16-bit PWM generators. - Up to eight 16-bit digital Capture timers. - Support Capture interrupt + UART - Up to two sets UART devices. - Buffered receiver and transmitter, each with 16 bytes FIFO. + SPI - Up to two sets of SPI device. - Master up to 16 Mbps / Slave up to 10 Mbps. + I2C - One set of I2C device. - Master/Slave up to 1Mbit/s. + ADC - 12-bit SAR ADC with 600k SPS. - Single mode/burst mode/single cycle scan mode/continuos scan mode + Brown-out detector - with 4 levels: 4.5V/3.8V/2.7V/2.4V.
| ||||||||||||||||
|
Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.