Keil Logo

Microsemi A2F200M3F

The Microsemi A2F200M3F is a Microcontroller Subsystem (MSS) 100 MHz 32-Bit ARM Cortex-M3 1.25 DMIPS/MHz - Memory Protection Unit (MPU) - Single Cycle Multiplication, Hardware Divide - JTAG Debug, Serial Wire Debug and Single Wire Viewer Interfaces Internal Memory - Embedded Flash Memory (eNVM), 64 Kbytes to 512 Kbytes - Embedded High-Speed SRAM (eSRAM), 16 Kbytes to 64 Kbytes Multi-Layer AHB Communications Matrix - Provides up to 16 Gbps of On-Chip Memory Bandwidth 10/100 Ethernet MAC with RMII Interface2 Programmable External Memory Controller, Two I2C Peripherals Two 16550 Compatible UARTs Two SPI Peripherals Two 32-Bit Timers 32-Bit Watchdog Timer 8-Channel DMA Controller Clock Sources - 1.5 MHz to 20 MHz Main Oscillator - Battery-Backed 32 KHz Low-Power Oscillator with Real-Time Counter (RTC) - 100 MHz Embedded RC Oscillator; 1% Accurate - Embedded PLL with 4 Output Phases High-Performance FPGA Based on Actel's proven ProASIC FPGA Fabric Advanced 130-nm, 7-Layer Metal, Flash-Based CMOS Process Nonvolatile, Retains Program when Powered Off 350 MHz System Performance Embedded SRAMs and FIFOs - Variable Aspect Ratio 4,608-Bit SRAM Blocks - x1, x2, x4, x9, and x18 Organizations - True Dual-Port SRAM (excluding x18) - Programmable Embedded FIFO Control Logic Secure ISP with 128-Bit AES via JTAG FlashLock to Secure FPGA Contents Five Clock Conditioning Circuits (CCCs) with up to 2 Integrated Analog PLLs - Phase Shift, Multiply/Divide, and Delay Capabilities - Frequency: Input 1.5–350 MHz, Output 0.75 to 350 MHz Analog Front-End (AFE) Up to Three 12-Bit SAR ADCs - 500 Ksps in 12-Bit Mode - 600 Ksps in 8- and 10-Bit Mode Internal 2.56 V Reference or Optional External Reference One First-Order DAC (sigma-delta) per ADC - 12-Bit 500 Ksps Update Rate Up to 5 High-Performance Analog Signal Conditioning Blocks (SCB) per Device - T.

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Header Files
FLASH Utilities
MDK Middleware
The following middleware components are pre-configured in MDK-Professional
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.