NXP (founded by Philips) LPC2106/01

The NXP (founded by Philips) LPC2106/01 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 128KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 64KB RAM, Vectored Interrupt Controller, Two UARTs, one with full modem interface. I2C serial interface, SPI serial interface. Two timers, each with 4 capture/compare channels. PWM unit with up to 6 PWM outputs. Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Development Tools Compiler, Assembler, Linker, Debugger MDK-ARM (Microcontroller Development Kit) Keil MDK-Lite Download Keil JTAG Debuggers ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller Data Sheets Data Sheet 166,223 bytes User Manual 2,495,132 bytes Header Files LPC210X.H 12,764 bytes FLASH Utilities FLASHit hse Electronic ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller Device Programmers Dataman 48Pro2 Super Fast Universal ISP Programmer Dataman Programmers Ltd. Dataman 48Pro2C Super Fast Universal ISP Programmer Dataman Programmers Ltd. Dataman 848Pro2 Super Fast Stand-Alone Programmer Dataman Programmers Ltd.

Real-Time OS RTX Real-Time Operating System Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. External Interrupts GPIO (32-Bits) Phase Locked Loop Pin Connect Block Power Control Pulse Width Modulator Real Time Clock SPI Interface System Clock Timer 0 Timer 1 UART 0 UART 1 Vectored Interrupt Controller VPB Divider Watchdog Timer The following on-chip peripherals are not simulated. Flash Memory I²C Interface Memory Accelerator Module Memory Mapping Control