STMicroelectronics STM32H7B3I-EVAL Rev.A
STM32H7B3LIHxQ, 1 x 8M x 32-bit SDRAM, 1 x 8M x 16-bit Nor Flash
Mounted Device:
STM32H7B3LIHxQ
Compatible Devices:
STM32H7B3
Debug Interface:
JTAG/SW
JTAG/SW
ST-Link
STMicroelectronics STM32H7B3I-EVAL Evaluation Board Support and Examples
- Digital I/Os:34 x Motor Control Connector
- USB:1 x High-Speed USB-OTG with micro-AB Connector
- USB:1 x Full-Speed USB-OTG with micro-AB Connector
- CAN:1 x CAN
- RS232:1 x RS232
- I2C:1 x I2C expansion connector
- Line In:1 x Stereo Line IN headset jack
- Line Out:1 x Stereo Line OUT headset jack including analog microphone input
- Mic:2 x ST MEMS microphones
- Other Connectors:1 x Wi-Fi module compliant with 802.11 b/g/n
- Push-buttons:3 x Push-Buttons for Reset, Wakeup, Tamper
- Potentiometer:1 x Analog Voltage Control for ADC Input (potentiometer)
- Joystick:1 x 4-direction Joystick with a selection button
- Speaker:2 x Speaker
- LEDs:4 x 4 color user LEDs
- GLCD:1 x 800.480 4-inch 800x480 TFT color LCD with capacitive touch panel
- Camera:1 x Camera
- Other:1 x Digital Stereo Microphone
- On-board Debug Adapter:1 x On-board ST-LINK/V3E
- Power Supply:5 V USB Powered
- Power Supply:3 V - 5 V External Supply
- Device:STM32H7B3LIHxQ
- Compatible Devices:STM32H7B3,
On-Board Memory
8M x 32-bit SDRAM, 1M x 16-bit SRAM, 8M x 16-bit Nor Flash, 512-Mbit Octal-SPI NOR Flash
- RAM:1 x 8M x 32-bit SDRAM
- RAM:1 x 1M x 16-bit SRAM
- Flash:1 x 8M x 16-bit Nor Flash
- Flash:1 x 512-Mbit Octal-SPI NOR Flash
- SD/microSD/MMC Card Holder:2 x microSD card
| Development Tools | |
| Drivers |
|
| Examples |
|
| Documents |
