What's New in MDKARM Version 3.24

• [Device Support]
  Added support for Actel Cortex-M1 and COREMP7 devices.
• [Device Support]
  Added support for Toshiba ARM926EJ-S based TMPA910CRAXBG device.
• [Device Support]
  Added support for Toshiba Cortex-M3 based TMPM330FDFG, TMPM330FWFG, and TMPM330FYFG devices.
• [Device Support]
  Added ULINK support for Analog Devices ADuC7037 and ADuC7038 devices (Multi-TAP JTAG).
• [Device Support]
  Added start-up code example for Actel devices in ..\ARM\Startup\Actel.
• [Device Support]
  Updated Flash programming algorithms for Atmel SAM926x devices in ..\ARM\Flash.
• [Device Support]
  Updated Flash algorithm for Luminary LM3S devices with 256kB Flash. Mass Erase implemented according to Errata sheet and works now for the whole Flash.
• [Device Support]
  Corrected CAN register names according to new ST include files in ..\ARM\Boards\Keil\MCBSTM32\CAN.
• [Device Support]
  Corrected Altera Cortex-M1 driver, which now blocks interrupts during single stepping.
• [Device Simulation]
  Corrected Analog Devices ADuC70xx Interrupt Controller simulation according to updated user manual (IRQEN/FIQEN only set bits).
• [Device Simulation]
  Corrected Analog Devices ADuC70xx simulation of PLA Elements according to updated user manual.
• [Device Simulation]
  Corrected simulation of the UARTx window used for STM32x devices. The erroneous handling of the ESC-Key inside UARTx window is fixed.
• [Board Support]
  Updated examples for using the SAMICE target together with Atmel SAM926x devices in ..\ARM\Boards\Atmel.
• [Board Support]
  Added BSP for Atmel AT91SAM9RL-EK board with AT91SAM9RL64 device in folder ..\ARM\Boards\Atmel\AT91SAM9RL-EK.
• [Board Support]
  Added BSP for Toshiba BMSKTOPAS910 Starter Kit with TMPA910CRAXBG device in folder ..\ARM\Boards\Toshiba\TMPA910.
• [Board Support]
  Added BSP for Toshiba TMPM330 evaluation board with TMPM330FDFG device in folder ..\ARM\Boards\Toshiba\TMPM330.
• [Board Support]
  Added BSP for Keil MCBTMPM330 board with TMPM330FDFG device in folder ..\ARM\Boards\Keil\MCBTMPM330.
• [Board Support]
  Added RTX support for Atmel AT91SAM9RL devices in folder ..\ARM\Boards\Atmel\AT91SAM9RL-EK\RTX_Blinky.
• [Board Support]
  Updated the Measure sample application which is using the UARTx window for the following boards from ST and Keil: ..\ARM\Boards\ST\CQ-STARM2\Measure\, ..\ARM\Boards\ST\EK-STM32F\Measure\, ..\ARM\Boards\Keil\MCBSTM32\Measure\, and ..\ARM\Boards\Keil\MCBSTM32E\Measure\.
• [µVision3 IDE/Debugger/Simulator]
  Added UVSC_DBG_EXEC_CMD, GetCmdOutputSize, and GetCmdOutput functions, so that any command line command can be executed via UVSOCK.
• [µVision3 IDE/Debugger/Simulator]
  Added support for 'Find in Files' in multi-project-workspaces.
• [GNU Support]
  Changed GNU path settings from Cygnus to CodeSourcery.