ULINK-ME User's Guide

The Keil ULINK^®-ME USB-JTAG Interface Adapter is a small hardware adapter that connects the USB port of your PC to the JTAG or OCDS debugging port of your target hardware. ULINK-ME is kin to the original ULINK USB-JTAG Adapter but has been updated and enhanced in many ways. You may use ULINK-ME to:

• Download programs and test them on your target hardware.
• Program the on-chip FLASH memory of many devices.
• Program external FLASH memory of many target systems.

The ULINK-ME User's Guide describes the ULINK-ME Adapter and contains detailed operating instructions for the hardware.

• Introduction gives an overview of the ULINK-ME USB-JTAG Adapter, features, where to find Technical Support, and a reference of supported devices.
• Hardware Description explains the components of the ULINK-ME Adapter in detail.
• Setup shows the ULINK-ME Adapter components, how to connect and use the board, and describes the drivers and target cables.

Revision History

• January 2018: Updated for Vers. 5 board. Added Cortex-M board documentation.
• August 2015: Real-Time Agent obsolete; Documentation removed.
• September 2007: Initial revision.