Setting Up and Using ULINK-ME

Note

• The installation, configuration, downloading, debugging and rules for chaining multiple targets for the ULINK-ME USB-JTAG Adapter are identical to those for the ULINK2 USB-JTAG adapter. With the exception of Connecting ULINK-ME, the links below for those topics reference the appropriate pages in the ULINK2 User's Guide.

The ULINK-ME USB-JTAG Adapter is designed to be easy to use. There are just a few steps to configuring ULINK-ME and setting up your programming environment.

• Connecting ULINK-ME
  Shows how to connect ULINK-ME to your PS and target hardware.
• Installing Drivers
  Shows how to install USB drivers on your PC.
• Configuring µVision
  Shows how to configure target debugging and Flash programming options for µVision.

After ULINK-ME is connected and configured, you may program the Flash memory and debug programs. The following detailed explanations show you how.

• Downloading to Flash
  Shows how to download your program to the Flash memory of your target system.
• Debugging Programs
  Shows how to debug programs on target hardware.
• Chaining Multiple Targets
  Shows how to chain multiple target systems onto a single ULINK-ME.
• Using the Real-Time Agent
  Shows how to use ULINK-ME to view and modify your target's memory "on the fly" without stopping your program.