MCB1800/4300 User's Guide

Home

The MCB1800/4300 User's Guide describes the both the MCB1800 and MCB4300 Evaluation Boards and contains detailed operating instructions for the hardware.

• Introduction gives an overview of the MCB1800/MCB4300 Board, the features, hardware and software requirements, where to find information quickly, and where to find Technical Support.
• Setup shows the MCB1800/MCB4300 Board components, how to connect, configure, and use the board, and describes the jumpers.
• Theory of Operation explains the components of the MCB1800/MCB4300 board in detail.
• Writing Programs describes how to write programs, download to flash, and configure your project for debugging for the MCB1800/MCB4300 board.
• Example Programs lists the example programs available on the installation CD and on the Keil website. There are step-by-step instructions on building and running the BLINKY example programs.

Note

• The statements made in this manual are valid for both the MCB1800 and the MCB4300 boards, unless a differentiation is made explicitly. Both use the same base board and on-chip peripherals. Only the MCUs differ.