MCB900: CAPACITOR VALUE ON BOARD

Information in this article applies to:

• MCB900 Version 4

QUESTION

There is an updated schematic for the MCB900 board that includes the changes made in Revision 4 of the board. In the schematic (labeled "MCB900-v41"), the capacitor C10 has a value of 100nF. However, there is a knowledgebase article that says to use a 10uF capacitor here. Which is correct?

ANSWER

The 10uF is the correct value for the capacitor C10. All MCB900 Boards ship with the correct value of this capacitor. No board modifications are necessary.

MORE INFORMATION

• Refer to Schematics in the MCB900 User's Guide.

SEE ALSO

• MCB900: POWER SUPPLY PROBLEM ON MCB900 V4

Last Reviewed: Saturday, November 18, 2006